Fredenslund Workshop Tools MCP

{
  "type": "object",
  "required": [
    "width_mm",
    "depth_mm"
  ],
  "properties": {
    "depth_mm": {
      "type": "number",
      "description": "Desired top depth in mm; snaps to the nearest valid size (142–1966)"
    },
    "width_mm": {
      "type": "number",
      "description": "Desired top width in mm; snaps to the nearest valid size (142–1966)"
    },
    "include_svg": {
      "type": "boolean",
      "default": false,
      "description": "Also return the SVG markup itself (2–15 KB). By default only the link to the SVG is returned"
    },
    "thickness_mm": {
      "type": "number",
      "default": 19,
      "description": "Board thickness in mm (default 19). Through cuts are encoded at thickness + 1 mm overcut"
    },
    "counterbore_mm": {
      "type": "number",
      "default": 6,
      "description": "Counterbore depth in mm for the Ø15 screw-hole rings (default 6; 0 omits them; never deeper than the thickness)"
    }
  },
  "additionalProperties": false
}

{
  "title": "MFT/3 hole pattern",
  "readOnlyHint": true,
  "openWorldHint": false,
  "idempotentHint": true,
  "destructiveHint": false
}

{
  "type": "object",
  "properties": {
    "system": {
      "type": "object",
      "properties": {
        "gap_mm": {
          "type": "integer",
          "maximum": 200,
          "minimum": 40,
          "description": "Gap between cleat boards (default = board_mm, as in the Fredenslund system); pitch = board + gap"
        },
        "board_mm": {
          "type": "integer",
          "maximum": 200,
          "minimum": 40,
          "description": "Cleat board height (default 90). The gap equals the board unless gap_mm is given"
        },
        "buffer_mm": {
          "type": "integer",
          "maximum": 200,
          "minimum": 10,
          "description": "Buffer between hangers and above the floor (default 30)"
        },
        "material_mm": {
          "type": "integer",
          "maximum": 40,
          "minimum": 3,
          "description": "Material thickness (default 12)"
        },
        "tip_trim_mm": {
          "type": "integer",
          "maximum": 5,
          "minimum": 0,
          "description": "Tip trim taken off the 45° bevel (default 1); changes finished sizes only"
        },
        "hook_plate_mm": {
          "type": "integer",
          "maximum": 120,
          "minimum": 20,
          "description": "Hook plate incl. material (default 72); at most the gap − 3, so a hanger can be lifted off"
        },
        "bottom_limit_mm": {
          "type": "integer",
          "maximum": 2000,
          "minimum": 0,
          "description": "The lowest cleat keeps its underside this far above the floor (default 210)"
        },
        "table_height_mm": {
          "type": "integer",
          "maximum": 2000,
          "minimum": 0,
          "description": "Table height — the top of the table (default 900). The table hangs on a cleat table_offset_mm lower, and that cleat anchors the rows"
        },
        "table_offset_mm": {
          "type": "integer",
          "maximum": 1000,
          "minimum": 0,
          "description": "How far below the table height the table's own cleat has its top edge (default 60 = hook plate − material, so the tabletop hangs like a hanger; 0 makes the table height the top of a cleat)"
        },
        "top_clearance_mm": {
          "type": "integer",
          "maximum": 4000,
          "minimum": 0,
          "description": "Clearance below the ceiling (default = the gap, 90); at least the hook plate + 3, so a hanger on the top row can be lifted off"
        }
      },
      "description": "Override the Fredenslund system (all in mm). Leave out to use the defaults",
      "additionalProperties": false
    },
    "hangers": {
      "type": "array",
      "items": {
        "type": "object",
        "required": [
          "x_mm",
          "cleat_top_mm",
          "width_mm"
        ],
        "properties": {
          "name": {
            "type": "string",
            "maxLength": 40,
            "description": "Optional name shown on the drawing and in the cut list (max 40 characters)"
          },
          "x_mm": {
            "type": "integer",
            "maximum": 7990,
            "minimum": 0,
            "description": "Left edge, mm from the wall's left edge (x + width at most 8000, the widest wall)"
          },
          "width_mm": {
            "type": "integer",
            "maximum": 8000,
            "minimum": 10,
            "description": "Width in whole mm (the planner drags in 10 mm steps; the palette sizes are 50–550)"
          },
          "rows_below": {
            "type": "integer",
            "default": 0,
            "maximum": 49,
            "minimum": 0,
            "description": "Extra cleat rows spanned below the hook row (0 = one cleat; each adds one pitch, 180 mm, to the panel height). Typical: hooks 0; shelves and boxes 1 (a shelf hangs on its row and rests on the cleat below); deep boxes and panels 2; tall panels 3"
          },
          "cleat_top_mm": {
            "type": "integer",
            "maximum": 4000,
            "minimum": 0,
            "description": "Height from the floor of the top edge of the cleat the hanger hangs on; must be one of the wall's rows (300, 480, 660, 840, 1020, 1200 … 2280 with default settings)"
          },
          "extension_mm": {
            "type": "integer",
            "default": 0,
            "maximum": 4000,
            "minimum": 0,
            "description": "Extra panel length below the lowest cleat, mm (default 0)"
          }
        },
        "additionalProperties": false
      },
      "description": "Hangers to place. Each hangs on one cleat row, given by the height of that cleat's top edge from the floor"
    },
    "rows_off": {
      "type": "array",
      "items": {
        "type": "integer",
        "minimum": 0
      },
      "description": "Cleat rows to switch off, by cleat top height from the floor"
    },
    "wall_width_mm": {
      "type": "integer",
      "default": 1220,
      "maximum": 8000,
      "minimum": 200,
      "description": "Wall width in mm (200–8000, default 1220 — a full plywood sheet)"
    },
    "wall_height_mm": {
      "type": "integer",
      "default": 2440,
      "maximum": 4000,
      "minimum": 300,
      "description": "Wall height in mm (300–4000, default 2440 — a full plywood sheet)"
    }
  },
  "additionalProperties": false
}

{
  "title": "French cleat wall plan",
  "readOnlyHint": true,
  "openWorldHint": false,
  "idempotentHint": true,
  "destructiveHint": false
}